The New 70cc Roto V2 ****NEW!!****
ROTO70
Check out the new ROTO Motor
- an engine with a real difference!
 |
The revolutionary NEW
ROTO Motors
| New 70cc V2 FLAT TWIN! |
|
|
|
ROTO 70 V2
|
| Technical Specifications |
| DISPLACEMENT |
70 cc |
| POWER |
|
| BORE |
2 x 39.5 mm |
| RPM |
1100 - 7000 RPM |
| WEIGHT |
2300 g |
| PISTON ROD |
4 needle bearing Torrington |
| CRANK SHAFT |
2 ball bearing NSK+ 1 needle bearing Torrington |
| IGNITION |
Electronic micro-processor controlled |
| FUEL |
Unleaded/Synthetic 2 stroke oil 1:50mix |
| PROPELLER |
24/10 -26/10 | |
Dimensions
|
Manufacturing technology used in producing the
ROTO Motors
|
- Crank case - is cut by a CNC milling cutter. After that it is annodised with a special colour.
- Cylinder - it is made from a single piece of dural with pressed sleeve from steel it is turned and machined to the correct size.
- Piston - cast from high grade silicon alloy with one piston ring. The aperture for the plug 8 mm is honed.
- Piston rod - is forged, which is completely machined. Two needle bearings are moulded into piston rod.
- Crank shaft - made from one piece of steel, it is forged and hardened and it is completely machined.
- Rear Case of Engine - cast and then hardened and machined slide - valve layed.
The individual components and clearances are checked and then assembled in a special workplace. |
Model market and will bring you many innovative designs and prototypes
Weight: 20000.00